In fact, most of our friends' light control concept still stays on the traditional needs of using wall switches to control the corresponding lights or realizing dual control. In fact, if the lighting in the whole room has achieved intelligence, the light control concept must be adjusted. The main points are as follows:
1. Areas that can use automation will use automation.
In areas where the lights are on and off when people walk in, such as toilets, kitchens, and aisles, the human body sensor is used to realize the dim light and the lights are turned on automatically, and it is OK for no one to turn off the lights automatically for 3 to 10 minutes. That is to say, these lamps are generally not controlled in daily life and are completely automatic.
2. Control all lights in the room at the same time, not all the way.
Generally, the living room, dining room, bedroom, and study light room will have multiple lights, such as the living room will have a main light, light strip, two-way spotlights, floor lamps (can be directly controlled using intelligent sockets), etc. The main light, light strip, and two-way spotlights are controlled by two two position intelligent wall switches. We can set the following scenarios:
Normal lighting: the main light is of medium brightness, the light strip and spotlight are all on, and the floor lamp is off.
The brightest lighting: the main light is the brightest, the light strip and spotlight are all on, and the floor lamp is on.
Soft lighting: one third of the brightness of the main light, the light strip is on, the spotlight is on and off, and the floor lamp is on.
The darkest lighting: the main light has the lowest brightness, the light strip is turned on, both spotlights are turned off, and the floor lamp is turned off.
Turn off all lights: turn off the main light, light strip, spotlight and floor lamp.
In daily life, instead of controlling a certain street lamp, we directly use these scenes to control all the lights in the living room. These scenes can be directly executed by Xiao Ai, or the keys of the wall switch can be set as the execution scene. In this example, two two position intelligent wall switches are used, and a total of four keys can be converted into wireless switches. After conversion, only two of the four keys need to be taken out to control all the lights. The functions can be set as follows:
Press key 1 and click: to execute the normal lighting scene
Press key 1 to double-click: execute the brightest lighting scene
Press key 2 and click: to execute a soft lighting scene
Double click with key 2: execute the darkest lighting scene
Press key 1 and key 2 at the same time to turn off all lights.
After this setting, the light of the whole room can be controlled at the same time, either through Xiao'ai or through the wall switch. If some light flickering prompts or color temperature change prompts are added in the light switching process, the light system of the whole room will have a sense of science and technology. Of course, you can also stick a Yeelight color light band on the back of the sofa or TV to adjust the color and color temperature of the light, which will make it more difficult to use. By the way, the green meter smart wall switch panel is pure white. You can choose laser engraving or other ways to mark it, which can prevent confusion.
After the remaining two position intelligent switch button is switched to a wireless switch, you don't need to control the light. You can turn on and off the theater scene, or the music scene. The specific settings depend on your lifestyle.