1.6 Circuit output control, each circuit over-current is 16A, and each circuit function switch is operated independently.
2. Terminal interface connection 2.5 ² Line, straight out straight in, without turning and turning.

Intelligent lighting module (2 pieces)

3. Plug in terminals are used for communication and power interfaces.

4. The CPU chip of intelligent lighting module is imported from abroad.

5. There are 6 manual buttons on the panel of intelligent lighting module to manually operate the loop function

6. The module installation wiring size is the same as that of the six Chint 1P leakage switches, and the node wiring is the same.

7. The intelligent lighting module has a built-in Y-BUS interface, and the module communication uses the CAN communication mode



Function configuration



Working voltage: AC 12V (both AC and DC)



Load capacity: ≤ 16A per circuit

Working temperature: - 45 ℃~70 ℃

Power failure maintenance:>10 years

Power loss: ≤ 1.2W

Control circuit: 6-circuit contact 16A
Fire protection function: fire protection 1 circuit, normally open point.