Hotline:021-60839008

ZIGBEEE3.0 Wireless System

Location Position:Home > Products & Applications

ZIGBEE3.0 Wireless Gateway

  

ZIGBEE intelligent gateway is the data acquisition center and control command transmission center of the terminal ZIGBEE3.0 device, which does not participate in logic control and is the bridge between the logic controller (4.3-inch touch screen) and the terminal wireless device. The gateway adopts Linux operating system, stable and reliable operation, and can access a variety of ZIGBEE3.0 wireless intelligent devices, such as human presence detectors, illuminance sensors, intelligent wall switches, gas alarms, carbon monoxide alarms, door magnetic detectors, infrared detectors, flood detectors, sound and light alarms, curtain controllers, lights, etc.

        ZIGBEE gateways are widely used in factories, office buildings, smart homes and other application places, solving the troubles of requiring a lot of wiring in intelligent applications, saving pipelines, labor, etc., and is also the embodiment of energy-saving and low-carbon society.

Product port diagram

Product diagram
Input: Comes with 220V/5V adapter.
Rated power: 1.5W
Networking mode: Ethernet
Wireless connectivity: Zigbee 3.0
Wireless communication distance: ≤80 meters (outdoor open environment)
Working temperature: 0°C~45°C
Operating humidity: ≤95%RH (no condensation)
Dimensions: 90x90x24mm

Hardware parameters
A. Hardware interface
Power interface: MicroUSB
Network cable interface: RJ45
Reset hole: Press and hold for 5 seconds to restore factory settings
B. Zigbee: maximum acceptance sensitivity: -100dBm, transmit power: 19dBm.


System architecture diagram

Exegesis
1. The lamp adopts ZIGBEE3.0 dimming drive power, which can adjust the brightness or color temperature.
2. Smart panels, illuminance sensors, human presence sensors, temperature and humidity sensors, etc. all adopt ZIGBEE3.0 standard protocol products and support 220V power supply.
3. ZIGBEE gateway is mainly responsible for signal collection and control instruction delivery, and access the switch through network cable.
4. The touch screen has both logical operation and local centralized operation and management functions, and needs to provide 12~24V power supply through network cable access to the switch. The rest of the devices need to provide a 220V power supply.
5. The web server of the central control room adopts BS architecture and comes with embedded configuration and control software, which can realize unified and centralized management of terminal devices.
6. Other products that support ZIGBEE3.0 standard protocol can access ZIGBEE gateway. However, it is recommended to provide samples for matching test before access.



For more product details, please consult the company's customer service, we will provide you with professional technical support.

<<Back