The lighting system design of railway passenger station should be based on advanced, mature, energy saving, long life technology characteristics, and cooperate with the overall planning of the building, to achieve comfortable and beautiful use effect. Lighting equipment grouping and control reasonable arrangement, to meet the needs of various states of use. While making full use of natural light, we can achieve low carbon, high efficiency, energy saving and effective control of light pollution. The lighting design of the station house follows the common concept and basic principles. Under the premise of similar building structures, the main technical standards and schemes should be unified as far as possible, so as to achieve the coordination of individuality and commonness. The lighting of station room can be divided into general lighting, regional general lighting, local lighting and mixed lighting. The combination of general lighting and local lighting should be determined according to the needs of different places to consider energy-saving factors. General lighting shall be provided in all places, and the layout of the lamps shall not only meet the requirements of the standards, but also have a group control function. When general lighting cannot be taken into account, local lighting should be set up at ticket gates, ticket gates, verification offices, business Windows and other locations. Station lighting can be divided into normal lighting, emergency lighting, on-duty lighting, obstacle lighting, etc.

Functions and advantages of Shanghai Di Control CNCOMATE intelligent lighting control system (1), the realization of intelligent lighting control intelligent lighting control system, can make the lighting system work in the automatic state, the system will be pre-set to switch a number of basic working states, according to the pre-set time automatically between various working states. For example, in the peak period of passenger flow in the ticket hall and waiting hall, when the passenger flow of the station is the largest, lights can be turned on in all the ticket hall and all areas of the waiting hall to facilitate the entry and exit of personnel; In the daytime, when the outdoor illumination is sufficient, part of the lighting circuit in the station can be closed and only 1/2 or 1/3 illumination can be maintained to save energy; At night, for large railway stations, the traffic is also very large, you can open the ticket hall and waiting hall all the loop, easy access to passengers; When the train enters the station, the infrared reflector sensor installed on the platform of the lane can automatically open the lighting loop on the platform of the lane, so as to facilitate the boarding and unloading of passengers. In addition, through the programmable control panel installed in the station duty room or control room, according to special circumstances, at any time to switch different scenes, in order to adapt to the lighting requirements of various situations. (2) Considerable energy-saving effect Saving energy and reducing operating costs is an important issue that owners are concerned about. Because the intelligent lighting control system can through reasonable management, according to the different date, different time in accordance with the operation of each function area in advance to set the illuminance, do not need lighting, ensure that the lights will be turned off, intelligent lighting control system can provide the most economic energy consumption to provide the most comfortable lighting; The system ensures that lights are turned on only when necessary, or at the required brightness level, thus greatly reducing energy consumption. (3) Prolong the life of lamps and lanterns the fatal cause of lamp damage is too high voltage. The higher the working voltage of the lamp, its life is reduced exponentially. On the contrary, the working voltage of the lamp is reduced, and the service life is multiplied. Therefore, reducing the working voltage is an effective way to prolong the life of lamps and lanterns. The intelligent lighting control system can successfully suppress the surge voltage and surge voltage of the power grid, so that the lamp will not be damaged prematurely due to the above reasons. The voltage limit can also be determined artificially by the system to improve the life of the luminaries. Intelligent lighting control system can successfully extend the life of lamps by 2-4 times. It not only saves a lot of lamps, but also greatly reduces the workload of replacing lamps and lanterns, effectively reduces the operating cost of lighting system, and has special significance for lamps and lanterns in difficult to install areas and expensive lamps in railway. (4), improve the management level, reduce maintenance costs intelligent lighting control system, ordinary lighting artificial on and off into intelligent management, the system will automatically run in accordance with the pre-set procedures. If changes are needed, all lights can be controlled with the touch of a button, greatly reducing the operating and maintenance costs of the station and bringing a great return on investment. Iii. The design is based on "General Principles of Civil Building Design" GB503522005 "Code for Electrical Design of Civil Buildings" JGJ/T 16-92 "Intelligent Building Design Standard" GB/T50314-2000 "Intelligent Building Evaluation Standard" DG/T08-2001 "Intelligent building engineering Quality Acceptance Standard" GB50339-2003 "Intelligent Building Construction and Acceptance Code" (DG/TJ08-601-2001 J10099-2001) National building standard design electrical device standard Atlas, building electrical installation engineering Atlas

4. Design and Implementation of Intelligent Lighting Control System of Railway Station (1) Lighting control of railway station ticket office

The ticket hall is one of the main lighting control areas of the railway station. In order to keep the lighting environment of the ticket hall comfortable all the time and meet the needs of various ticket staff and staff on the ticket hall lighting, intelligent lighting control system is adopted. Intelligent lighting control system adopts switch quantity control module, intelligent control panel, with lighting, manual or automatic opening function. According to different time and external environment can be set by software programming different lighting effects, lighting can be flexibly segmented according to temporary needs, open the transformation, to achieve energy saving. The automatic operation of public lighting area can also be realized by setting the control mode of clock, so as to facilitate passengers, managers and staff on duty. Through the intelligent control panel, a variety of lighting effects can be preset and combined into different lighting scenes. When you need to change the lighting scene, you can change the lighting scene by pressing a button. The use of intelligent lighting control system can successfully suppress the power grid surge voltage and surge voltage, so that the lamp will not be damaged because of excessive voltage, prolong the life of the lamp 2-4 times. The intelligent lighting control system adopts soft start and soft off technology, which avoids the instantaneous increase of power grid voltage and also protects the power grid system of the whole railway station. The scene control panel of the railway station is installed in the integrated duty room and the integrated control room to avoid unnecessary personnel contact and reduce unnecessary misoperation. Control mode: Central control: Monitor all lighting circuits in the main control center, and control the switch of lights through the computer operating interface. Time control: Set the scene according to spring, summer, autumn and winter to realize automatic opening or closing loop, and the staff can change flexibly at any time. Light isolation control: According to the different time periods of ticket sale, the lighting circuit is distinguished by the way of light isolation to achieve 1/3, 2/3 and 1/3 illuminance control. Field programmable switch control: by programming to determine the circuit controlled by each switch key Single key can control a single or multiple circuits, at a specific time, can be installed in the duty room or control room of the intelligent control panel, manual control. (2) Lighting control of waiting hall of railway station

The waiting hall is another important control area of the railway station. Depending on the number of people waiting for the train, different number of lights are turned on to save energy and give passengers a good and comfortable feeling at the same time. Intelligent lighting control system adopts switch quantity control module, intelligent control panel, with lighting, manual or automatic opening function. According to different time and external environment can be set by software programming different lighting effects, lighting can be flexibly segmented according to temporary needs, open the transformation, to achieve energy saving. The automatic operation of public lighting area can also be realized by setting the control mode of clock, so as to facilitate passengers, managers and staff on duty. Through the intelligent control panel, a variety of lighting effects can be preset and combined into different lighting scenes. When you need to change the lighting scene, you can change the lighting scene by pressing a button. The use of intelligent lighting control system can successfully suppress the power grid surge voltage and surge voltage, so that the lamp will not be damaged because of excessive voltage, prolong the life of the lamp 2-4 times. The intelligent lighting control system adopts soft start and soft off technology, which avoids the instantaneous increase of power grid voltage and also protects the power grid system of the whole railway station. The scene control panel of the railway station is installed in the integrated duty room and the integrated control room to avoid unnecessary personnel contact and reduce unnecessary misoperation. Control mode: Central control: Monitor all lighting circuits in the main control center, and control the switch of lights through the computer operating interface. Time control: Set the scene according to spring, summer, autumn and winter to realize automatic opening or closing loop, and the staff can change flexibly at any time. Light isolation control: according to the different time periods of waiting for the bus, the lighting circuit is distinguished by the way of light isolation to achieve 1/3, 2/3, 1/3 illumination control. Field programmable switch control: by programming to determine the circuit controlled by each switch key Single key can control a single or multiple circuits, at a specific time, can be installed in the duty room or control room of the intelligent control panel, manual control. (3) Train station lane platform lighting control

Train track platformlighting, also occupied the train stationIntelligent lightingA major part of In order to facilitate the arrival of the train, passengers can safely get on and off the train in different time periods, through the installation of infrared induction on the track, when the train arrives, automatically open the necessary platform light, convenient people get on and off the train; When the train is gone, it automatically closes the loop again.
At the same time when the train enters the station, for the sake of safety, it can automatically open the alarm signal of the railway station, after a period of alarm, it will automatically close. This also well ensures the safety of passengers, which also reflects the intelligencelightingThe characteristics of
Control mode:
Central control: Ownership in the main control centerlightingLoop monitoring, through the computer operating interface control light switch.
Induction control: When the train arrives at the station, it can automatically open or close the loop through infrared reflector sensors installed on both sides of the lane to realize automatic control.
Field programmable switch control: by programming to determine the circuit controlled by each switch key Single key can control a single or multiple circuits, at a specific time, can be installed in the duty room or control room of the intelligent control panel, manual control. 
                            

(4) Flood lighting control of railway station

The distance between each lighting circuit of the flood lighting outside the railway station is far, and the power of each circuit is larger. If the use of ordinary lighting, control is very troublesome, it is difficult to do on time switch. The use of intelligent lighting can use a variety of control methods for outdoor flood lighting, such as 6 PM to open the station's entire landscape lighting lamps, 11 PM to close part of the landscape lighting lamps, 12 o 'clock after leaving only the necessary lighting, the specific time can also be automatically adjusted according to the length of day and night changes in the four seasons and holidays. It can also be controlled by the control panel according to the field conditions. By time management automatic control mode: Shanghai DI control CNCOMATE web page servo controller, can be automatically managed according to the programmed time, the setting is very simple and convenient, and can be controlled by all the lamps and lanterns according to the year, week, day as the unit timing control switch. Control through the control panel: Each control panel and intelligent control module can store 200 preset scenes, which can be called at any time when needed. The control panel is placed in the control area of the station management, so that passengers can not touch the station, to prevent misoperation. Control mode: central control (monitor all lighting circuits in the main control center, control the light switch through the computer operating interface) timing control (usually, holidays, evening, late night and other timing control) field programmable switch control (through programming to determine the circuit controlled by each switch key, single key can control a single circuit, multiple circuits)

Shanghai DI Control CNCOMATE intelligent lighting control system of the web page servo controller contains embedded graphical interface, can effectively manage and control the system, the operation interface is friendly, simple to learn, easy to use and so on. It is compatible with TCP/IP network and can also be controlled on the network. The main functions of the central monitoring software are as follows: monitoring through the interface software, controlling the field loop, timing control, setting management password, and sensor management control. Shanghai Di Control CNCOMATE intelligent lighting central monitoring software can complete the following main functions: real-time monitoring: the condition of the lighting system can be simulated on the monitor with graphics, the operator can observe the actual switching state of the lamp on the screen, and click the lamp graphics to control each loop. Scene control: Multiple scene modes can be set on the software menu. When using the mode, the system automatically executes the mode. The scenario mode can be added or modified as required. Time control: Prepare the time control program according to the season, work and rest time, illuminance change, the loop automatically press the program switch. Operation management: The system can collect the data of the lighting system regularly, which is convenient to master the use time of the lamps and the automatic record of the electricity charge.

Induction control: start and stop infrared sensors; Start and stop illuminance sensor. System security: A security management password is set in the monitoring software to restrict the permissions of operators. Operators with different permissions can perform different operations based on user requirements.