● Product characteristics

1, can manage up to 192 loops (including lighting, curtain, air conditioning, fan, water pump and other different types of load);

2, can customize the scene, loop, timing of the name, so that the user operation experience more intuitive, simple;

3. Edit and set parameters such as scene, timing, illumination, etc., realizing automatic operation and centralized management of small and medium-sized systems without professional programming;

4, can insert the plane effect base map, customized map control interface;

5, special metal embedded box, screw free disassembly;

6, the screen adopts 7 inches of real color industrial resistance screen

● Product specifications and characteristics

Power used/consumed: DC 12V - 24V / 1VA

Screen: 7.0 inch real color touch screen 1024x600

Microprocessor: ARM series single chip microcomputer

Communication mode: 2 x RS-485 1/2 duplex/Modbus RTU Protocol

Communication rate: 9600~76.8k bps (factory/recommended 9600 bps)

Maximum communication distance: 4000 ft (1.2 km)

Mailing address range: up to 16

Size: 210(W) mm x 150(H) mm x 30(D) mm

Installation mode: wall hanging, open hole embedded type

Weight: About 500g

Environment/Use: 0 to 70 °C; 10 to 85% RH

Storage environment: -10 to 90 °C; Less than 90% RH

Both transmit and execute data in the upper/lower layer controller

Independent monitoring application software is available to upload different application software according to different control requirements

Have the ability of self-diagnosis, real-time monitoring of the lower controller and loop.

A battery-free program memory device (EEPROM) can store all operating programs to prevent data loss in the event of power failure.

Both have extended FLASH, SD card slot convenient system upgrade.

The guard dog device automatically resets.

● Product shell size and label

Product details please consult our relevant personnel!